Optimizer |

Optimize your cutting with Swedex “Optimizer”
Swedex “Optimizer” an optimization tool for controlling, securing and developing the sawing process.

Height
[mm]
Diameter
[mm]
Blade rotation
[RPM]
No. of teeth
[z]
Feed rate
[m/min]

Tooth shape
AA
BA
DA
CA
RA
EA
EAXH

State the wite boxes and the program will give pitch, cutting speed, gullet feed index and feed per tooth Gullet feed index is intended for saw blade engineers and is only a recomendation. It is made more accurate by stating the folowing alternative: Green, Dry, Metall, Plastic:dry

Specify:

Sharing

51

[mm]
cutting speed

62

[m/s]
My chip pocket

71

[mm²]
Feed rate / tooth

0.41

[mm]

MATERIAL		Cutting speed [m / s]	Feed / tooth [mm]
Wooden	cutting	50-80	0,10-0,35
	cleavage dry	60-100	0,30 to 0,50
	cleavage raw	60-100	0,40 to 1,00
	sawmill	60-100	0,70 to 1,50
Veneered and laminated sheets		60-80	0,05 to 0,12
fibreboard		70-80	0,08 to 0,25
Plasterboard and chipboard, plywood		50-80	0,08 to 0,25
Veneer, paper cores (bobbins)		50-80	0,08 to 0,25
Hard plastics		50-75	0,05 to 0,12
Plexiglas, PVC, bakelite		50-85	0,05 to 0,12
Plastic Laminate		50-75	0,03-0,06
Soft plastics		15-50	0,05-0,08
Aluminium		60-80	0,02-0,05
Copper		50-70	0,03-0,08
Brass		50-70	0,03-0,08
Porous concrete		40-60
Steel (not tempered)		5-30	0,01-0,03